Local roofersFree to callNo forms to fill out
Serving Montvale and nearby towns
Menu
Call (551) 390-0362
Tile Roofing

Tile Roof Installation Montvale, NJ

Tile roof installation in Montvale covers more than the tile: the framing check, underlayment, battens, fasteners, flashing and ridge all decide how long the roof lasts. Dial (551) 390-0362 to talk with a local roofer about a new tile roof.

Tile is one of the heaviest roofing materials a house can carry, so a tile roof installation starts below the roof. Because tile is so heavy, homes converting from shingles usually need the framing checked, and some need reinforcement first. New homes designed for tile have the load built in from the start.

Next comes the material. Clay tile is fired, keeps its color for a very long time and is lighter than most concrete tile, while concrete tile comes in many profiles and slowly fades as its surface weathers. Shapes range from flat and low profile tile to high profile S tile and traditional barrel tile.

What lasts is the system under the tile. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Picking a durable underlayment at the start pushes the first relay decades down the road.

Depending on what the roofer finds, tile roof installation in Montvale, NJ can go hand in hand with tile roof replacement and roof installation.

Need tile roof installation in Montvale? Call (551) 390-0362 and describe the problem to a roofer who works in Montvale.

Call now
The process

How tile roof installation works

Here is how a roofer usually installs a tile roof.

  1. Plan for the load

    The roofer confirms the framing can carry the tile, often with an engineer when a home is switching from shingles, and pulls the permit the job needs. Extra tile is ordered so there are matching spares for repairs later.

  2. Dry in the roof

    Solid sheathing is inspected and renailed, then the roof is dried in with underlayment, doubled where the slope calls for it. The underlayment is the true waterproof layer, so this step deserves the most care.

  3. Install battens

    Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. That air space under the tile helps the roof shed heat and dry out.

  4. Install flashing

    Wide valley metal, pan flashing at walls and soft metal flashing at pipes are installed so water is carried over the underlayment, not into it. Because tile is thick and curved, flashing must be wider and shaped to fit.

  5. Lay the tile

    Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.

  6. Cap the ridge

    Ridge and hip caps are set on a raised ridge board, either in mortar or with a dry ridge system and a vented closure that lets attic air out. Before the crew packs up, cracked pieces are swapped out.

What is included

A complete tile roof system

Structural review

Rafters or trusses are confirmed before tile is ordered so the roof does not sag over time.

Tile flashing

Every penetration and wall joint is flashed which is where tile roofs usually leak.

Underlayment system

The deck is covered with underlayment suited to the slope as the real barrier against water.

Tile fastening

Battens or direct fastening hold every course in a pattern set by the tile profile.

Eave closures

Bird stops close the eave and caps seal the ridge so birds and wind-driven rain stay out.

Related service

Barrel Tile Roof Installation Montvale, NJ

Barrel tiles go on in pairs, with pans forming the water channels and rounded covers overlapping the gaps. Their tapered shape and deep profile create the rolling texture that defines the style. The open curves at the eaves and ridges must be closed so birds, wind and rain cannot get in.

Barrel tile roof installation in Montvale calls for extra attention to fastening, since cover tiles sit high and catch wind. Straight, evenly spaced rows take chalk lines and patience on the deck.

Related service

Spanish Tile Roof Installation Montvale, NJ

Most Spanish tile today is one-piece S tile, which mimics the classic two-piece look while going on faster. It comes in clay and in concrete, with colors from terracotta to multi-tone blends. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.

Spanish tile roof installation in Montvale follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Where the tile meets walls and chimneys, flashing is shaped to fill the curve without leaving gaps. If you choose a blend, the roofer mixes tile from several pallets at once to spread the color evenly.

Local help

Tile Roof Installation Near Me

Tile roofs in Montvale go onto newer homes built for them and onto older homes where owners are switching from shingles. In Montvale and neighboring communities including Park Ridge, Woodcliff Lake, Saddle River and Hillsdale, the biggest variable on a conversion is whether the existing framing can carry tile, and storms that bring strong wind make fastening choices as important as the tile itself.

For tile roof installation in Montvale, NJ or nearby towns like Park Ridge, Woodcliff Lake, Saddle River and Hillsdale, call (551) 390-0362 to reach a roofer who covers your street.

Roofs in this climate

Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Montvale is busiest after a hard winter and before the next one.

Why call

Why act early

Drier ceilings

A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.

Roofers who know Montvale

Roofers in Montvale know the roof types and weather wear common in local homes.

Know what happens next

Ask the roofer about the cause, the options and the estimate before work starts.

Tile Roof Installation FAQ

Can tile be installed over an existing roof?
The old roofing is torn off before tile is installed. Removing the old roof also takes weight off the framing, which matters with a material this heavy.
Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. On slopes below 4 in 12, code requires two layers.
What is better, clay or concrete tile?
The choice comes down to priorities. Clay keeps its color through the tile, is lighter than most concrete tile and can last for generations. Concrete tile comes in many profiles and finishes, but it is heavier, absorbs more water and its color fades over time.
How long does tile roof installation take?
Expect more time than a shingle job, since each tile is placed and fastened by hand over more layers. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.
How heavy is a tile roof?
Clay and concrete tile are among the heaviest roof coverings, several times the weight of shingles. A home framed for shingles needs a structural check before switching, and some need added framing. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.

More questions? Call (551) 390-0362

Other services that may help

  • Tile Roof Replacement

    Replacing a worn tile roof, either by relaying the existing tile over new underlayment or by switching to new tile, so the layers under the tile last as long as the tile.

    Learn more
  • Roof Installation

    Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.

    Learn more
  • Tile Roof Inspection

    An inspection of a tile roof from the ridge to the attic, without breaking tile in the process.

    Learn more
  • Roof Ventilation

    Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, based on what the attic actually needs.

    Learn more

Looking for something else?

See all roofing services

Talk to a Montvale roofer about tile roof installation

Call (551) 390-0362 to talk to a roofer serving Montvale, NJ.

Talk to a local roofer(551) 390-0362Call now

Free to call. No forms to fill out.

Call (551) 390-0362